Btowin 4" Solid Wood Furniture Legs 4Pcs Glazed Bun Feet w/ 5/16" Bolts & Plates

Btowin 4 Inch Solid Wood Furniture Legs

Upgrade your furniture with these stylish Btowin 4-inch solid wood furniture legs. Crafted from Eucalyptus with a glaze finish, these turned bun feet add a touch of elegance and stability to sofas, cabinets, ottomans, loveseats, and recliners. Each leg comes with a 5/16" threaded hanger bolt for easy installation in most US-made furniture.

Key Features

• Brand: Btowin
• Material: Eucalyptus
• Height: 4 inch (10cm)
• Design: Glazed Turned Bun Feet
• Threaded Bolt: 5/16" / M8 (8mm) Hanger Bolt
• Included Hardware: M8 Mounting Plates, Rubber Pads, Screws
• Quantity: 4 Legs per set

Specifications

• Height: 10cm / 4 inch
• Upper Diameter: 6.5cm / 2.55 inch
• Bottom Diameter: 4cm / 1.6 inch
• Screw Thread: 5/16” / M8 (8mm)

Installation Guide

1. Insert the mounting plate and secure it with the provided screws. A pilot hole may be required if none exists.
2. Screw the wooden legs into the installed mounting plates.

Note on Installation: These legs are pre-drilled with 5/16 inch hanger bolts, which fit most US-made furniture. Older furniture may have different bolt sizes.

Important Considerations

• Due to the natural wood material, slight variations in size, pattern, and color are normal and expected.
• Colors may appear slightly different due to lighting and monitor settings.
• Manual measurement may result in a 1-2mm error.
• These legs are intended for furniture replacement and are not handicrafts. Minor imperfections are a natural characteristic of the material.

What You Will Receive

• 4x Wooden Legs
• 4x M8 Mounting Plates
• 4x Rubber Pads
• 12x Screws

Safety Warning

Always use appropriate safety equipment when drilling. Do not expose the legs to liquids. Follow installation instructions carefully to ensure stability and safety.