Isomat Aquaseal Tanking Tape 120mm x 10m Wet Room Waterproof Joint Sealing

Isomat Aquaseal Tanking Tape

This tanking tape is a fleece-backed tape designed to provide a waterproof seal prior to tiling. It is ideal for use on board joints, corner joints, and pipe entries in shower areas, wet rooms, and wet zones, or anywhere a watertight seal to a corner, gap, or crack is required.

The tape can be tiled directly onto waterproof areas (e.g., wet room boards) or used prior to applying a Tanking Membrane to create a 100% waterproof membrane over conventional plaster and timber-based boards. Its unique fleece backing offers cross-directional stability, accommodating simultaneous board movements and ensuring a permanent watertight seal.

Key Benefits

• Waterproof
• Permanently flexible with cross-directional stability
• Easy to apply

Areas for Use

• Showers, wet rooms, and wet zones in bathrooms
• Waterproofing before tiling
• All board joints, corners, and pipe entries
• Can be tiled directly or over coated with Aquaseal Tanking Membrane for full wet zones

Surface Preparation

All surfaces must be clean, sound, and dust-free. The tape can be over-coated with Waterproof Tanking Membrane immediately after application. On internal corners, ensure the tape overlaps on both sides to prevent a weak spot in the centre of the joint.

Specific Data

• Appearance: Fleece Backed Butyl Tape
• Application Temperature: +5°C to +40°C
• Service Temperature: -30°C to +80°C
• Colour: Grey
• Solids Content: >90%
• Coverage: 10 Linear Metres

Health & Safety

Consult MSDS for full list of hazards.

Storage

Store in a well-ventilated room at a maximum temperature of 30°C. Storage outside these parameters will dramatically reduce shelf life. Protect from frost.

Shelf Life

12 months from date of manufacture when stored according to manufacturers instructions.

PLEASE NOTE: THIS TAPE IS NOT SELF-ADHESIVE