YABOANG PCIe 10 Port SATA Expansion Card 6Gbps ASM1166+JMB575 Low Profile

YABOANG PCIe 10 Port SATA Expansion Card

Expand your storage capabilities with the YABOANG PCIe 10 Port SATA Expansion Card. This card offers 10 SATA III (6Gbps) ports, powered by the ASM1166 and JMB575 chipsets, providing a significant boost to your system's storage capacity. It is compatible with Windows, MAC, and Linux operating systems and includes a low profile bracket for versatile installation.

Key Features

• 10 SATA 3.0 Ports: Supports 6Gbps data transfer speeds for all 10 connected drives.
• High-Performance Chipset: Features ASM1166 + JMB575 for reliable performance.
• Wide System Compatibility: Works with Windows 8/10, Ubuntu, and Linux. (Note: Synology systems may only recognize 4 hard drives. WIN7 users are not recommended.)
• PCI-Express 3.0 Compatible: Backward compatible with PCI-Express v2.0/v1.0. For optimal speed, use in a PCIe 3.0 slot.
• Advanced Features: Supports Native Command Queuing (NCQ), hot swapping, and various SATA generation speeds (6.0Gb/s, 3.0 Gbit/s, 1.5 Gbit/s).
• Software RAID Support: Can be used to create RAID configurations if your motherboard supports it.
• Included Accessories: Comes with 10 SATA cables and a SATA power splitter cable for immediate setup.
• Low Profile Bracket: Includes a low profile bracket for installation in smaller PC cases.

Specifications

• Product Name: 10-port SATA3.0 expansion card
• Product Interface: PCI-E 1X
• Product Chip: ASM1166+JMB575
• Supported Systems: Windows 8 / 10 / Ubuntu / Linux
• SATA Specification Compliance: Serial ATA 3.0, backward compatible with SATA2.0/SATA1.0
• PCI-Express Specification Compliance: PCI-Express v3.0, backward compatible with PCI-Express v2.0/v1.0
• Data Transfer Rates: Supports 6.0Gb/s, 3.0 Gbit/s, and 1.5 Gbit/s
• SATA Drive Compatibility: Compatible with SATA6G, 3G, and 1.5G hard drives
• Additional Support: Supports Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x, and Gen 3i, Native Command Queuing (NCQ), FIS based on port multiplier switch or command switch, hot swap.

Important Notes

• This card cannot be used in a PCI slot.
• Software RAID is supported, not hardware RAID.
• For best results, use SATA3.0 data cables and install in a PCIE3.0 slot. PCIe V1.0 slots will limit speed to approximately 250MB/s.
• Ensure your motherboard BIOS is set to AHCI mode for SATA. Some motherboards may require manual enabling of Gen2 high-speed mode in BIOS.
• Speeds may vary based on computer configuration and SATA SSDs used.
• If you experience incomplete or unstable detection, please ensure you have the correct drivers installed.

Packing List

• 1x PCIe 1X 10 SATA Card
• 1x Bracket Baffle (Low Profile)
• 10x SATA Cables
• 1x SATA Power Splitter Cable