
Low Stock
1 / 9

Low Stock
1 / 9
Vikye Trusted Seller
Water Flow Switch, 250V 15A RC1" Electrical Flow Switch, 1.0MPa Electrical Water Valve for Water Treatment System, Central Air Conditioning, Water Cooling Unit
OUT OF STOCK FREE UK DELIVERY
0.219 sold today
£0.00
Inc. VAT · Free UK delivery
Qty
1
Notify me when back in stock
Delivery
Standard UK Delivery·3–5 daysFREE
Next Day UK Delivery·1 day£7.99
EU Delivery·7–14 days£12.99
Worldwide Delivery·14–28 days£19.99
Ships in 1–2 daysDispatched from the UK
30-day returnsChange your mind, no fuss
Buyer protectionEvery order covered
Secure paymentPayPal & Stripe
Sold by Vikye, fulfilled by UKyard
Genuine product from an authorised UK seller. View seller profile
About this item
- •Features:
- •It is used to measure the dynamic state of the liquid flowing through the pipeline, such as: water, ethylene, ethylene glycol and other liquids that have no corrosive effect on copper.
- •When the flow rate of liquid exceeds or falls below the set flow rate, the SPDT contacts can turn on one circuit and cut off the other at the same time. The flow switch is usually used in places requiring interlocking or "cut-off" protection.
- •Repeatability error is about 2.5%, ensure high stability of products.
- •IP54 protection level, more safer to use.
- •Specification:
- •Model: LKB-01D
- •Material: Stainless steel, Copper, Plastic
- •Rated voltage: 250V
- •Rated current: 15A
- •Repeatability error: 2.5%
- •Regulation range: 5.2-23 L/min
- •Switch type: SPDT
- •Connector: RC 1"
- •Max.working pressure: 1.0MPa
- •Medium temperature: 0-100℃
- •Product dimension: 8.5*6.5*12.6cm / 3.3*2.6*5in
- •Weight: Approx.817g/ 28.8oz
- •Package List:
- •1 * Water Flow Switch
- •1 * User manual
- •Installation method:
- •1. Open the flow switch
- •2. The switch has been set at minimum flow rate. Turn the adjusting screw counterclockwise to increase the flow setting value.
- •3. Press the target to check whether the micro switch can work normally. Excessive clockwise rotation of the adjusting screw may lead to the failure of the flow switch.
- •4. After the installation, please press the lever of the flow switch several times to check. If there is no "click" sound, turn the adjusting screw counterclockwise until there is "click" sound.
- •5. The adjustment screw of lacquer seal is only used for the first time to adjust the state of flow switch. Please do not change or adjust it.
- •6. Observe three operating cycles to ensure that the switch and the system to which it is connected are operating properly and cover the switch enclosure promptly.
Specifications
BrandVikye
TypeLiquid Flow Switches
CategoryLiquid & Mass Flow Meters

Vikye
£0.00