
Low Stock
1 / 4

Low Stock
1 / 4
Ronseal Trusted Seller
Ronseal RSLSFG5L 5 Litre Shed and Fence Preserver - Green
OUT OF STOCK FREE UK DELIVERY
0.640 sold today
£0.00
Inc. VAT · Free UK delivery
Qty
1
Notify me when back in stock
Delivery
Standard UK Delivery·3–5 daysFREE
Next Day UK Delivery·1 day£7.99
EU Delivery·7–14 days£12.99
Worldwide Delivery·14–28 days£19.99
Ships in 1–2 daysDispatched from the UK
30-day returnsChange your mind, no fuss
Buyer protectionEvery order covered
Secure paymentPayPal & Stripe
Sold by Ronseal, fulfilled by UKyard
Genuine product from an authorised UK seller. View seller profile
About this item
- •Product Description
- •Ronseal Shed and Fence Preserver has been specially formulated to give colour and protection to sheds and fences. The deep penetrating 2-in-1 formula eradicates woodworm whilst preserving the wood to prevent rot and decay. The unique formula contains added water repellents, waterproofing the timber from the damage caused by water ingress. Before You Start: Ensure all surfaces are clean, dry and free from surface coatings such as paint, varnish or stain etc. Where timbers are suffering from decay, before applying Ronseal Shed and Fence Preserver, remove all decayed wood and replace with sound, treated timber. Cut out and burn all decayed wood at least 45cm beyond the area of damage. Application: Shake well before use. This is important to ensure uniform colour. Ronseal Shed & Fence Preserver can be applied by brush or dipping. Where possible, end grains should be treated by dipping to ensure complete penetration. Apply a minimum of 2 even coats of Ronseal Shed and Fence Preserver, covering all faces, sides and joints, paying particular attention to the end grain. Refer to all coverage guidelines. The second coat should be applied after the first coat is fully dry. Avoid contact with bitumen, bitumen felt or mastics and plastics.
- •Directions
- •Before use, ensure surfaces are clean, dry, and free from surface coatings. Remove all decayed wood and replace with treated timber if necessary. Shake the product well before use. Apply a minimum of 2 even coats, covering all faces, sides, and joints, paying particular attention to the end grain. Refer to all coverage guidelines. The second coat should be applied after the first coat is fully dry. Avoid contact with bitumen, bitumen felt or mastics and plastics.
Specifications
BrandRonseal
TypeStain
CategoryStains

Ronseal
£0.00