FLOPLAST MDPE 25mm x 25mm x 20mm Reducing Tee

About this item

FloPlast Compression MDPE Reducing Tee Fitting – 25mm x 25mm x 20mm Floplast range of MDPE fittings are suitable for use above and below ground for mains cold water supplies. Connects two lengths of MDPE pipe of the same diameter, with a third smaller diameter length of MDPE pipe branching off. High impact resistant body and nut which enables it to absorb thermal and mechanical stress. The fittings have a co-polymer polypropylene body, nut and thrust ring, acetal grab ring, and nitrile seal. Excellent pressure resistance, tested to 48 bars. Conformably exceeds the water requirements of the UK water bylaws scheme. A simple few turns of the nut create your compression joint with the grab ring taking hold. Other Sizes Available: 20, 25 & 32mm Technical Specifications: Compression MDPE Reducing Tee Fitting Manufactured to BS 6572:1985 (Blue) Compact Design WRAS Approved (Water Regulations Approval Scheme) Material: Polyethylene Brand FloPlast Female Adaptor 90 Degree Angle Colour: Blue Pressure Resistance High Impact Resistant Body Size – 25mm x 25mm x 20mm

Specifications