ELEGOO Standard LCD UV 405nm 3D Resin for MSLA 3D Printer Photopolymer 3D Printing Resin - Black 2KG

About this item

• •ELEGOO photopolymer resin is a type of polymer that changes its physical properties when introduced to light. In the case of 3D printing , these are typically liquid plastic resins that harden when exposed to a light source, which works perfectly with our Photocuring resin
• •Usage condition :
• •1) Shake up the bottle before use and avoid direct sunlight and dusty environment
• •2) Do not drink it and keep it out of the reach of children
• •3) Please wear a mask and gloves when using to avoid direct skin contact and maintain indoor ventilation
• •4) If you got skin contact please wash away with waters immediately and if you feel discomfort please see a doctor ASAP.
• •5) Once the model is complete, please wash it with high 95% degree or higher ethanol alcohol for 30 seconds at least
• •6)If you don’t use the resin please do not leave them in the resin tank over 48 hours or put them back to its original bottle and seal it.
• •Material Properties :
• •Curing wave-length: 405 nm
• •Hardness: 79.0 D
• •Shrinkage: 7.1 %
• •Viscosity (25°): 552.0 mpa.s
• •Liquid density: 1.100 g/cm³
• •Solid density: 1.184 g/cm³
• •Tensile strength: 23.4 Mpa
• •Elongation at break: 14.2 %
• •Curing time: 6-10 s
• •Color option: Grey, White, Green, Black, Transparent, Yellow, Blue, Red
• •Shelf life: 1 year

Specifications