Low Stock
1 / 9
Low Stock
1 / 9
Denash Trusted Seller
Denash HD Touch Screen 7 Inch, Integrated IPS External Screen, Thin Touchscreen Monitor 170° Viewing Angle 45% NTSC, for RasPi
OUT OF STOCK FREE UK DELIVERY
0.144 sold today
£0.00
Inc. VAT · Free UK delivery
Qty
1
Notify me when back in stock
Delivery
Standard UK Delivery·3–5 daysFREE
Next Day UK Delivery·1 day£7.99
EU Delivery·7–14 days£12.99
Worldwide Delivery·14–28 days£19.99
Ships in 1–2 daysDispatched from the UK
30-day returnsChange your mind, no fuss
Buyer protectionEvery order covered
Secure paymentPayPal & Stripe
Sold by Denash, fulfilled by UKyard
Genuine product from an authorised UK seller. View seller profile
About this item
- •Description
- •Specification:
- •Item Type: 7 Inch IPS Display
- •Material: Glass
- •Model: 70H 1024600 IPS B
- •Screen Type: IPS
- •Screen Size: 7 Inches
- •Viewing Angle: 170°
- •Color Range: 45% NTSC
- •Brightness: 350cd/m²
- •Backlight Adjustment Mode: PWM Software Dimming
- •Contrast Ratio: 800:1
- •Color Depth: 16.7M
- •Refresh Rate: 60Hz
- •User Interface: 40PIN 0.5mm/0.02in FPC
- •Application Scenarios: New Energy, Electronic Sentinel, Smart Home, Internet of Things, Consumer Electronics, etc.
- •How to Use:
- •Install and use.
- •For use with PC:
- •Connecting the 70H 1024600 display to the development accessory using the FPC Cable 15cm/5.9in flexes cable (note the direction of the flexes cable, 1 to 1, 40 to 40 serial number connection).
- •Connecting the Display interface to the HD Multimedia Interface interface of the PC.
- •Connect the Touch interface to the PC's USB interface.
- •Universal PWM dimming method.
- •Connect the GND of the microcontroller (such as potentiometer) to the GND pin in the figure below, and connect the voltage output of the microcontroller (DC 0‑3.3V) to the PWM pin in the figure below to control the backlight brightness by changing the voltage.
- •Note: DC 3.3V is the darkest and 0V is the brightest.
- •Package List:
- •1 x7 Inch IPS Display
- •1 x Development Board
- •1 x Adaptor
- •1 x Flexes Cable
- •1 x Data Cable
- •1 x HD Multimedia Interface Cable
- •Note:
- •1. Input voltage, output voltage exceeding the maximum value or improper may cause permanent damage to the device.
- •2. Input current should be more than 500mA, otherwise it will result to startup failure or abnormal display, and long time in abnormal state may cause permanent damage to the equipment.
- •3. The output current should be less than 200mA, otherwise it will result to startup failure or abnormal display, and the abnormal state for a long time may cause permanent damage to the equipment.
- •4. Please do
Specifications
BrandDenash
TypeMonitors
CategoryMonitors
You might also like
Denash
£0.00