78 Inch/2M Grey Wet Room Floor Water Barrier, Silicone Shower Threshold Water Barrier,Screen Door Seal Strip,Shower Tray Sealing Strip,Water Retaining Dam for Bathroom Bath Sink(L Shape,3cm High)

About this item

• •Attention: In order to achieve a stable and long-lasting effect, please pay attention to the following question
• •This floor joint suit for smooth flat floor types, such as smooth marble floor, cladding floor and other smooth surface. can not use for severe sagging and ridges floor, large space floor and glass mosaic.
• •Buy a size 5cm-10cm longer than the required length!
• •Use with silicone sealant: Fill the space between the walls with both ends of the water barrier and all around the bottom by the silicone sealant to achieve a completely airtight effect, remove excess glue to make the contact smooth.
• •Clean the floor and dry it before installation!
• •Do not peel all stickers once:Mark the position and measure the appropriate length before peeling the sticker, peel the sticker little by little one side, then press the peeled position on the surface at the same time, then peel to the left little by little. Do not peel all stickers for once and pull the tape back from the water if found its not well installed.
• •After the installation is complete, it should be kept dry for 24 hours and should be postponed for 1-2 days in autumn and winter.
• •Installation method:
• •Measure the length and width of the countertop, In the corner we recommend cutting it to 45 degrees, and then connecting two parts to ensure its firmness.
• •Tear off the adhesive: in this process avoiding dust on the adhesive tape and affecting its adhesion.
• •Paste: apply the seal of the water dam gently and slowly, keeping it horizontal or vertical, gently pressing with your fingers.
• •Glue: The most important and necessary step is to fill the bottom edge of the water retention strip with caulking to ensure a long lasting and strong adhesion.

Specifications