2M Silicone Wet Room Floor Water Barrier,Shower Sealing Strip,Shower Water Barrier,Bathroom Sink Edging Seal Strip,Wet and Dry Separation(T Shape,White)

About this item

Cautions In order to achieve stable and lasting effect please pay attention to the follow question This floor seal suit for kinds of Smooth flat floor such as smooth marble floor coating floor and other smooth surface can not use for Severe sags and crests floor big gap floor and Mosaic glass floor a size that is 5cm10cm longer than the required length use with silicone sealant Fill the gap between the walls with the two ends of the water barrier and all around of bottom by silicone sealant to achieve a completely hermetic effect remove the excess glue to make the smooth Clean the ground and dry it before installation Not peeling all of sticker onetime Mark the position and measure suitable length before peeling sticker peeling sticker little by little one side and then press the peeled position to the surface as the same time then peeling left little by little Not peeling all of sticker for onetime and pull up the water retaining strip if found its not install well After the installation is completed it needs to be kept dry for and it needs to be postponed for 12 days in autumn and winter Installation Method Measure Measure the length and width of the countertop In the corner we recommend you cut it to 45 degree and then connect two part to ensure its firmness Tear off the adhesive in this process avoiding dust on the adhesive strip and affecting its adhesion Paste apply the water dam seal gently and slowly keeping it horizontal or vertical pressing gently with your fingers Glue The most important and necessary step is to fill the bottom edge of the water retention strip with caulk to ensure a longlasting and strong adhesion

Specifications