15 Pcs Thread Inserts M14x1.5 Female Thread Repairing Accessory Assortment Kit Drill Helicoil Repair Kit

About this item

• •Specification:
• •Item Type:Thread Sleeve
• •Material:Stainless Steel
• •Thread Insert Size:M14x1.5 Length:2D
• •.w-e-text table td,.w-e-text table th,;.w-e-text table,
• •Package List:
• •1 x Spiral Drill
• •1 x Screw Tap
• •1 x Wrench
• •1 x Break Pin Tool
• •1 x Hex Wrench
• •10 x Thread Repair Insert
• •Note:
• •Instructions
• •Drill holes using a matching drill bit.
• •Use wire threaded (special) tap tapping, the tapping depth must exceed the wire screw sleeve mounting length.
• •Insert the wire screw into the mounting wrench with the tail down. Turn the wrench handle to screw the wire screw into the threaded hole.
• •Use a break pin tool to align the mounting handle (tail) with a hammer to strike the punching tool and the tail handle can be removed.
• •When there is a problem with the installation of the threaded screw sleeve, (such as a jumper), the threaded sleeve can be taken out by the wire threading tool.

Specifications