JUGCUT 2.5mm 1.5m Solder Wick Braid Flux Desoldering Electronic Soldering Wire

JUGCUT Solder Wick Braid with Flux

This JUGCUT solder wick braid is designed for efficient desoldering of electronic components. It features a no-clean flux and is ideal for removing excess solder.

Usage Steps

• Step 1: Place the appropriate length of solder wick onto the cleaned solder point. Lightly heat with a soldering iron; the molten solder will be absorbed by the wick.
• Step 2: After solder absorption, remove the soldering iron and solder wick.
• Step 3: Cut off the used portion of the solder wick with pliers.

Precautions

To prevent burns, avoid direct contact with the hot solder wick. Use tweezers or other tools to handle the wick.

Specifications

• Brand: JUGCUT
• Width: 2.5mm
• Length: 1.5m
• Type: No-Clean Solder Wick Braid