Flexible ETFE Solar Panel Charging Kit Marine Caravan MPPT Charger Controller (100W, BLACK)

About this item

• •Solar Kit Contents 100 Watt Flexible Solar Panel with 1M cable & MC4 plugs attached 5 Metre Solar Power Extension Cable with MC4 Connectors 1.5 Metre fused battery cable with battery rings
• •Independent Off-Grid Solar Power Source
• •Our flexible solar panels now include the far superior ETFE outer layer. This is essential for the long life of your flexible solar panel. The smooth shiny finish flexi panels are PET finish which can break down and peel off due to UV solar damage, often in less than 2 years’. ETFE is a little more expensive during production but worth it in the long run. It also has the benefit of slip resistance for marine applications
• •Suitable for marine usage, also includes water-tight MC4 connectors. Also for Boats, Caravans, Motor-homes, electric fencing, road/ path/ driveway illuminated signage, campsites, yurts, multi-panel off grid power source for small buildings, remote telecoms, mobile food outlets, and many more…
• •One or more solar panels can be connected a battery bank and power inverter using a solar charge controller. You can therefore have a 240v power supply anywhere in the world without grid supply. Please see our solar power kits.
• •Solar Panels do still generate power during cloudy and rainy weather!
• •We have a rough guide below to solar panel power output relative to weather conditions:-
• •100% power output – clear sky midday sun with the panel fully tilted toward the sun’s position in the sky.
• •75-85% output – clear sky midday sun but with the panel laid flat
• •50-65% output – thin cloud, or intermittent small clouds
• •10-20% output – midday overcast sky or rainy conditions
• •Technical 100 Watt Flexible Max Power: 100w Max Power Voltage: 18v Max Current: 5.56A Open Circuit Voltage: 22.54v Short Circuit Current: 5.94A Weight: 2.5kg Size: 1200 x 540mm Power Tolerance: 3% Maximum System Voltage: DC1000v With 1M cable and MC4 plus attached Warranty 1 Year
• •In the event that the solar panel is in shade for a prolonged period, our solar panels has two built-in bypass diodes which will enable the panel to continue generating.
• •Warning: The Connection Order Below must be followed
• •1, Battery Cable, 2 Load Cable, 3, Solar Panel Cable
• •Do not install the charge controller in a sealed enclosure where battery gases can accumulate.
• •These charge controllers can be used with one or more 12V batteries where additional storage capacity may be needed.
• •Charge Controllers – MPPT Tracer AN Series product features Advanced maximum Power point tracking (MPPT) technology, with efficiency no less than 99.5% with 10-30% more power to the battery than cheaper PWM controllers. High quality components with maximum conversion efficiency of 98% Ultra fast tracking speed and guaranteed tracking efficiency Reliable automatic limit function of maximum PV input power, ensuring no overload risk. Wide maximum PowerPoint operating voltage range 12/24V DC automatic battery detection LCD panel display providing operating data and working conditions Supports 3 pre-programmed charging options, sealed, gel and flooded batteries Battery temperature compensation function Includes RS-485 communication bus interface and mod bus communication protocol RS-485 plug socket port can be used for PC monitoring via USB connection, this socket can also be used for connecting the MT50 external display unit to show real-time data and parameter settings. Remote temperature sensor connection port, to remotely detect battery temperature allowing and MPPT technology to adjust parameters. The controller has a three stage battery charging algorithm (bulk charging, constant charging and flow charging) for rapid, efficient and safe battery charging.
• •Technical – Tracer AN Series 1210AN Nominal System Voltage 12/24V Auto Battery Input Voltage Range 8V ~ 32V Max Charge/ Discharge Current 10A Max. PV Open Circuit Voltage 100V (At minimum operating environment temperature) Max. PV Open Circuit Voltage 92V (At 25 Deg C operating environment temperature) MPPT Voltage Range +2V ~ 72V Max Rated Charging Power (10A), 130W (12V), 260W (24V) Max. PV Array Input Power 390W (12V), 780W (24V) Wiring Connections, Solar +/-, Battery +/-, Power Output +/-, Temp Sensor, COM RJ45 Working Environment Temperature Range – 25 to +45 Deg C Humidity Range <95% Enclosure IP30 Dimensions 172mm x 139mm x 44mm Power Terminals 12 AWH (4mm sq) Weight 0.6Kg
• •Note:
• •Do not install the charge controller in a sealed enclosure where battery gases can accumulate.
• •These charge controllers can be used with one or more 12V batteries where additional storage capacity may be needed, or a combination of series and parallel batteries to make a 24V energy storage system.

Specifications