DollaTek TJA1050 CAN the controller interface module the bus driver interface module

About this item

• •DollaTek trademark Reg.NO:013726393
• •Pin Power Supply: 5V
• •Supply voltage tolerance: ± 5%
• •When not on the passive power: Yes
• •TxD dominant: Yes
• •The minimum bit rate: 60kbit / s
• •3.3V I / O compatibility: Yes
• •Weight:1g / 0.04oz
• •Size: 22 * 11 mm / 0.87 * 0.43 in(L * W )
• •TJA1050 has two operating modes: high-speed mode, silent mode.
• •Controlled by pin S.
• •It does not support some PCA82C250 variable slope control. Therefore, TJA1050 fixed slope. Despite its excellent symmetry of the output stage to make it better EMC performance than the previous product.
• •High-speed mode
• •High-speed mode is the normal operating mode, the pin S connected to ground can enter this mode. Since the S pin internal pull-down feature so that when it is not connected, high-speed mode is the default mode of operation. In this mode, the bus output signal has a fixed slope, and to try to quickly switch, this model is suitable for large bit rate and a large bus length, but this time its transceiver small cyclic delay.
• •Silent mode
• •In silent mode, the transmitter is disabled. So it does not matter TxD input signal. Thus, the transceiver operates in a non-transmitting state. It is at this time the supply current consumption as in a recessive state when the pin "S" then high, you can enter silent mode.
• •Package Included:
• •1X DollaTek TJA1050 CAN the controller interface module the bus driver interface module

Specifications