Boost Converter High Voltage Arc Generator 80kV High Voltage Pulse Generator Inverter 6-12V for high school science experiment, electronic instrument, negative ion generator.

About this item

• •Specifications:
• •Size: Approx. 65 x 24 x 22mm / 2.6 x 0.9 x 0.9in
• •Input voltage: 6V-12V
• •Input Current: 0.5A-2A(depending on the input voltage)
• •Input line length: about 10cm/3.94inch
• •High Voltage type: DC type
• •Output voltage: about 80KV (please pay attention to safety when used)
• •Output current: 0.5A
• •Output line length: about 10cm/3.94inch
• •High voltage poles ignition distance: ≤1.5cm(1.5cm is maximum distance, 1cm is better)
• •Module Usage Precautions:
• •1. Avoid power on when No load. You must adjust the appropriate distance for high-voltage terminal before power on, high-voltage line arc distance is proportional to the battery voltage and capacity.
• •2. The test arc distance from the short to long experimental, It is prohibited exceed the maximum arcing distance(<1.5cm,1cm is OK). Otherwise, energy can not be released due to high voltage, easily damaged modules.
• •3. The power time is not above 20 seconds each time. Since the output power is strong, it must be driven by rechargeable battery or storage battery. Improper voltage and long work will easily damage the high voltage module. Be careful when testing and using!
• •4.To determine whether the battery capacity can drive the maximum output power is the way to measure the battery voltage when in the arc state.
• •5. Small capacity series lithium battery is 7.2 V, voltage will drop to about 4V when arcing, the smaller the capacity, the lower the voltage will become. It is recommended to use above 2000MA lithium, it is better to choose above 4000MA battery.
• •Package Included:
• •1 x High Voltage Pulse Generator

Specifications