50L Pressure Tank Vessel Expansion for Domestic Waterworks Pump EPDM-Membrane Drinking Water

About this item

• •Replacement 50-litre pressure vessel for use in sanitary cold/hot water systems, suitable for nearly all domestic waterworks, solar and pressure maintenance systems, and garden pumps.
• •This pressure vessel (type 50 LVS) will be delivered including the EPDM rubber membrane. The vessel is designed for a maximum pressure of 5.6 bar and will be delivered for a horizontal positioning, including a plate for attaching domestic waterworks and is suitable for wall mounting. The vessel is checked for tightness with up to 5.6 bar water pressure by the producer.
• •It has a 32.89–33.25-mm (1″) pump connector. The pressure vessel additionally has an integrated valve (Schrader valve/car tyre valve) to regulate the counter-pressure in the space between tank and membrane. The bore diameter of the feet is 8 mm, and the elongated holes on the plate for attaching the pump measure 10 mm.
• •These vessels are made of quality-steel sheets and are welded according to UNI-EN standards and equipped with a heat and ageing resistant EPDM rubber membrane. The membrane can easily be exchanged.
• •About the pre-charge in the pressurised vessel:
• •The pre-charge pressure should be set approximately 0.1–0.2 bar lower than the switch-on pressure of the pump and has to be checked regularly. Any failure of observance may cause damage on the EPDM rubber diaphragm of the pressure vessel.
• •A more accurate calculation results from the formula “switch-on pressure of the pump x 0.9.” Example: Switch-on pressure of the pressure switch of the domestic waterworks is set to 1.5 bar: 1.5 bar x 0.9 = 1.35 bar. This means that the pressure can be set from 1.3–1.4 bar.
• •Important: The pressure of the vessel should only be inflated or deflated after the pressure to the water system has been released beforehand.
• •Attention: It is necessary to have released the air and water pressure before opening the pressure vessel!

Specifications

You might also like

Quick add

KATSU Tools

KATSU Hilift Base, Off-Road Base for Hi-Lift All Terrain Jack, Prevents Jack from Sinking for Soft Sand, Snow or Mud Ground 161196

£24.99

★★★★★(1)

Quick add

Honeywell Home

Honeywell Home Large Thermostat Guard, 8.59 x 24.77 x 18.42 cm

★★★★★(2)

Quick add

MXXiiv

2 PCS Jack Pad durable Rubber Pad Slotted Frame Rail Protector For BMW Series

Quick add

Generic

Brushed Brass Angled Radiator Valve Pair

★★★★★