150w Mono Solar Panel Kit Battery Charging MPPT Controller Brackets

About this item

• •Solar Kit Contents: 1 x 150w Mono Solar Panel by Lowenergie™ 15A Smart MPPT Charge Controller Solar PV to controller cable Battery to solar controller cable 4 White ABS Corner mounting brackets 1 Twin cable entry 1 Tube Sikaflex
• •Technical Specifications
• •150 Watt Solar Panel (with 1m Cable & Solar Connector Plugs) Maximum Power (Pmax): 150W Maximum Power Voltage (VMP): 20.16V Maximum Power Current (IMP): 7.45A Open Circuit Voltage (VOC): 24.19V Short Circuit Current (ISC): 8.05A Weight: 7.2KG Size: 1060*670*30mm Power Tolerance: +/-3% Maximum System Voltage: DC1000V
• •SmartSolar Charge Controller MPPT 75/15 Battery voltage (auto select) 12/24V Rated charge current 15A Nominal PV power, 12V 1a,b) 220W Nominal PV power, 24V 1a,b) 440W Max. PV short circuit current 2) 15A Automatic load disconnect Yes Max. PV open circuit voltage 75V Peak efficiency 98% Self-consumption – load on 12V: 19 mA 24V: 16 mA Self-consumption – load off 12V: 10 mA 24V: 8 mA Charge voltage ‘absorption’ 14,4V / 28,8V (adjustable) Charge voltage ‘float’ 13,8V / 27,6V (adjustable) Charge algorithm multi-stage adaptive Temperature compensation -16 mV / °C resp. -32 mV / °C Max. continuous load current 15A Low voltage load disconnect 11,1V / 22,2V / 44,4V or 11,8V / 23,6V / 47,2V or Battery Life algorithm Low voltage load reconnect 13,1V / 26,2V / 52,4V or 14V / 28V / 56V or Battery Life algorithm Protection Output short circuit / Over temperature Operating temperature -30 to +60°C (full rated output up to 40°C) Humidity 95%, non-condensing Data communication port VE.Direct (see the data communication white paper on VE website)
• •ENCLOSURE Colour Blue (RAL 5012) Power terminals 6 mm² / AWG10 Protection category IP43 (electronic components), IP22 (connection area) Weight 0,5 kg Dimensions (h x w x d) 100 x 113 x 40 mm
• •STANDARDS
• •Safety EN/IEC 62109-1, UL 1741, CSA C22.2
• •1a) If more PV power is connected, the controller will limit input power.
• •1b) The PV voltage must exceed Vbat + 5V for the controller to start.
• •Thereafter the minimum PV voltage is Vbat + 1V
• •2) A PV array with a higher short circuit current may damage the controller
• •Solar Panels to Controller Cable
• •5m Twin core 2.5mm2 cable with male and female connectors to one end.
• •Solar controller to Battery Cable
• •1.5m, 2 Core 2.5mm2 AMC round profile cable, in-line fuse, 30A spade fuse M8 ring terminals.
• •All cabling carefully design to minimise voltage drops and maintain maximum system efficiency. TUV Approved
• •Solar Corner Brackets ABS 4 Corners White Size per bracket 15x15x 6.5cm. Weight (4 brackets) 1.6kg
• •Easy Installation, holes should be drilled in each bracket, and corresponding holes in the solar panel frame on each side; then brackets should be fixed to the solar panel using self-tapping screws (not included).
• •Cable Entry ABS Twin cable entry for 4-12mm cables White Watertight Size: 12x10x5cm
• •Product Warranties
• •Solar Panel = 10 Year for materials and workmanship
• •Charge Controller = 5 Year
• •All other components have a 12 month warranty.
• •Power Output Warranty is at least 90% maximum power for first 10 years of use and;
• •Power Output Warranty of at least 80% maximum power output for up to 25 years use

Specifications