Timer Switch Module, Akozon Timer Relay Switch Module DC 6V~30V Trigger Delay On/Off Cycle with Digit LED Display Micro USB 5V

About this item

• •Specifications:
• •Voltage: 6V~30V(support micro USB 5.0V)
• •Trigger Source: High voltage level trigger(3.0V~24V), ground and system ground are not connected to improve system anti-interference ability(or you can connect them).
• •Load Capacity: DC 30V 5A, AC 220V 5A
• •Quiescent Current: 20mA
• •Operating Current: 50mA
• •Operating Temperature: -40℃~85℃
• •Size: Approx. 6.2*3.8*1.7cm / 2.44*1.49*0.67"
• •Timing Range: 0.1seconds to 999 minutes(continuously adjustable)
• •Instruction:
• •Operation Mode:
• •P1: After triggering signal, switch is connected for "OP" time, then disconnected; within the "OP" time:
• •P1.1: if trigger again, it is invalid.
• •P1.2: if trigger again, restart timing.
• •P1.3: if trigger again, switch is disconnected, stop timing.
• •P-2: After triggering signal, switch is disconnected for "CL" time, then switch is connected for "OP" time, and disconnect after timing.
• •P3.1: After triggering signal, switch is connected for "OP" time, then switch is disconnected for "CL" time, and enter loop. If trigger during loop, switch is disconnected and stop timing. The loop times (LOP) can be set.
• •P3.2: After power on, no need trigger signal, switch will be connected for "OP" time, then disconnected for "CL" time, and enter loop. The loop times (LOP) can be set
• •P-4: holding function. If there is trigger signal, timing will be reset, switch remains connected; when the disappears, it will disconnect after "OP" time. During timing, if there is a signal, timing will be reset.
• •OP: Connect time. CL: Disconnect time. LOP: Loop times(1~999, "---" indicates infinite times)
• •After setting mode, press SET button at the main interface to check the parameter of present mode.
• •Package Includes:
• •1 x Timer Switch Module

Specifications