TERF® 10 Pcs Wire Rope Clip Clamps M6 for Ø 6mm (1/4") Rope Cable Grip Galvanized Steel U Bolt Saddle Fastener for Rigging and Tension Cable

About this item

• •TERF Heavy Duty Wire Rope Grips Clamps:
• •Wide Applications: Hanging shade sails, hang floating ceilings, safety pipe,anchoring posts, squaring fence gates, making laundry lines, hanging banners,anchoring gym equipment, etc.
• •Specification:
• •Material: Galvanized Stainless Steel
• •Color: Silver
• •Surface: Polished
• •Size: M6 / 6mm, for diameter 6mm wire rope or cable
• •The correct way to attach wire rope clipsis as following:
• •1. Apply the 1st clip one base width from the dead end of wire rope. The baseor saddle should bear on the live end of the rope -- U-bolt on the short end.Tighten nuts firmly.
• •2. Attach second clip as close to loop as possible. Tighten nuts but not firmly.
• •3. Attach balance of clips spaced equally between 1st two clips. Tighten all nuts completely. Apply initial load--inspect nuts and re-tighten.
• •TIPS
• •1. Tighten the nut using a socket / nut driver. Drills can be used, but be sure not to over-tighten because the wires may bend.
• •2. Be sure to fold back a minimum of 3 inches and 3/4 inches of wire
• •3. Do not use plastic coated wire rope.
• •4. Do not install saddles on the dead ends of the cable. The dead ends of the cable only U-bolts, broken will not affect the breaking strength of the lifting wire.
• •5. Do not reuse the clips.
• •6. Inspect all clips periodically
• •Package included:
• •10 X M6 / 6mm Wire Rope Clamps

Specifications

Customer Reviews