PUSOKEI PCIe 6 Port SATA 3.0 Expansion Card, Compatible SATA 6G 3G 1.5G HDD, for XP/7/8/10/LINUX

About this item

• •Specification:
• •Name: 6-port SATA3.0 expansion card
• •Model: PCE6SAT-M01
• •Master control: for marvell 88SE92xx+109X
• •Interface: PCI-E 1x, 2x, 4x, 8x, 16x
• •Support system: for WINXP / / / / LINUX
• •Bus interface: PCI-Express x1 slot
• •Expansion interface: 6 SATA3.0 interfaces
• •Product size: approx. 12 * 10 * 2cm / 4.7 * 3.9 * 0.8inch
• •The PCIE to SATA3.0 riser card is used as follows:
• •First, the system disk and PCIE to SATA3.0 riser card connection conditions and solutions:
• •1. The SATA interface mode of PCIE to SATA3.0 is AHCI mode. If you want to plug in the system disk on our card, the premise is that your system disk must be installed in AHCI mode when installing the system on the motherboard. Otherwise, the system cannot be started through our transfer card.
• •2. If it is determined that the SATA interface installation system of the system disk inserted in the motherboard is AHCI mode, then you can directly insert the hard disk into our card, and then enter the motherboard BIOS to set the system disk as the first boot.
• •3. If the above two conditions are met, if the hard disk interface of the motherboard still fails to start, or restarts repeatedly, it may be caused by the conflict between the hard disk interface of the motherboard and our transfer card. The solution is to enter the motherboard BIOS and set the hard disk interface option of the motherboard to Disabled, then save and restart to start the system.
• •Package List:
• •Riser card *1
• •Half height baffle *1

Specifications

Customer Reviews

You might also like

Scancom

Three Unlimited Calls, Texts & Data Sim - Monthly Contract - Activate & Port your number - Access to Three & Vodafone - Effective rental of £12 per month for 24 months

New

Add to basket