Low Stock
1 / 9
Low Stock
1 / 9
Denash Trusted Seller
Denash 7 Inch Portable Touch Monitor, QLED Capacitive Touch Screen, 1024×600 Thin Full HD Resolution Monitor, for RasPi, for Computers
OUT OF STOCK FREE UK DELIVERY
£0.00
Inc. VAT · Free UK delivery
Qty
1
Notify me when back in stock
Delivery
Standard UK Delivery·3–5 daysFREE
Next Day UK Delivery·1 day£7.99
EU Delivery·7–14 days£12.99
Worldwide Delivery·14–28 days£19.99
Ships in 1–2 daysDispatched from the UK
30-day returnsChange your mind, no fuss
Buyer protectionEvery order covered
Secure paymentPayPal & Stripe
Sold by Denash, fulfilled by UKyard
Genuine product from an authorised UK seller. View seller profile
About this item
- •Specification:
- •Item Type: Capacitive Touch Screen
- •Material: Glass
- •Screen Type: QLED
- •Screen Size: 7 Inches
- •Viewing Angle: 170 Degree
- •Color : 78%NTSC
- •Brightness: 350cd/m²
- •Backlight Adjustment Method: PWM Software Dimming
- •Contrast: 800:1
- •Color Depth: 16.7M
- •Refresh Rate: 60Hz
- •User Interface: 40pin 0.5mm FPC
- •Application Scenarios: New Energy, Electronic Sentry, Smart Home, Internet of Things, Consumer Electronics, Etc.
- •How to Use:
- •Install and use
- •Use with PC:
- •Use the FPC Cable 15cm cable to connect the 70H 1024600 display screen to the development accessories (pay attention to the cable direction, 1 to 1, 40 to 40 serial number connection);
- •Connect the Display interface to the PC HD Multimedia Interface interface;
- •Connect the Touch interface to the USB interface of the PC;
- •General PWM dimming method:
- •Connect the GND of the microcontroller (such as a potentiometer) to the GND pin in the figure below, and connect the voltage output terminal (DC 0~3.3V) of the microcontroller to the PWM pin in the figure below to control the backlight brightness by changing the voltage.
- •Note: DC 3.3V is the darkest and 0V is the brightest.
- •Package List:
- •1 x Capacitive Touch Screen
- •1 x Cable
- •Note:
- •1: Input voltage output voltage exceeding the maximum value or improper may cause permanent damage to the device.
- •2: The input current needs to be greater than 500mA, otherwise it will cause startup failure or abnormal display, and it may cause permanent damage to the device if it is in an abnormal state for a long time.
- •3: The output current needs to be less than 200mA, otherwise it will cause startup failure or display abnormality, and it may cause permanent damage to the device if it is in an abnormal state for a long time.
- •4: Please do not store the display in a high temperature and high humidity storage environment for a long time. The display
Specifications
BrandDenash
TypeMonitors
CategoryMonitors
You might also like
Denash
£0.00